How To Arc Weld At Home Beginners Guide
FREE how to arc weld guide for you to use. There comes a time in a man’s life when he is going to need to learn how to arc weld. You might need to build yourself a nice big box trailer, or fix up the old farm plough. Yes, using a stick welder can be a bit of a pain in the bum at first especially if you have never done this before.
First things first we must start with the safety. You’re going to need to firstly get yourself a pair of welding gloves, ideally a 100% leather full length glove is best. These usually come up to just before your elbow and offer greater protection as they cover more of your arms. To protect the rest of your upper body wear a very thick heavy duty workshop type shirt. Cotton drill material is often used for work shirts so this would be a good material to look for in a work shirt. The same goes for your pants as you want something strong and heavy duty, usually a pair of jeans work well for this.
The hot sparks that are made from arc welding tend to shoot off in every direction. If you are welding on a workbench in particular, the little hot balls of slag will land on your feet. So make sure you wear shoes, better still leather workbooks are best. Protective eye wear will also be needed as you will be doing lots of grinding. Welding and grinding are like pen and paper, always together. Get some earmuffs to save you from going deaf from the grinder.
You can’t weld without using a welding helmet, so you’re going to need to make sure you have one that you can use. I like using those automatic darkening welding helmets as I find they make it really easy for me to see where I’m welding. I would definitely recommend any beginner to get one of these helmets.
I suggest that before you start to actually weld you take your grinder and clean off everywhere you plan on welding. Any foreign materials such as paint, rust, mud, oil and grease need to be removed otherwise they are going to affect the way it welds.
Now for the welding electrode to use. I would suggest that you use a 6013 rod as these are very easy to use. They can be bought anywhere and they are able to be used in all positions. These may also be labelled as a GP rod which means general purpose. On the back of the packet there will be instructions telling you how many amps you need to use for this particular sized welding electrode.
Now we can connect the earth clamp to the metal you plan on welding. For the best chance of getting a good arc started grab some metal clamps so that you can hold down the metal you are going to weld to your bench. This will stop it from moving around when you are striking the arc.
I recommend you use the scratch technique to get the arc started. This is just like striking a match except you are using a dirty great big long welding electrode. The idea is to drag or scratch the plate until the arc starts. Keep doing this over and over again until you can start it all the time. Once you master this you should be able to start the arc and hold it burning in the one spot.
The cialis soft tabs cheap next step once you can make and hold that welding arc is to make a line of weld bead. This is what is called a stringer bead. Once the arc is going, keep the welding rod leaning over and start to move away from the puddle of weld that was created by the initial starting arc. Remember to lean the rod in the direction of travel. As a rough guide, keep the tip of the burning electrode about one to one and a half times the diameter of the rod off the metal you are welding.
Hopefully this quick little guide will get you up and arc welding in next to no time. How to arc weld at home is very easy once you learn the proper methods of doing it.
Next find out more about how to arc weld, then visit this site http://www.learn-how-to-weld.com/how-to-arc-weld.html.
Related posts:
