PASS: The Code to Remember when Using a Car Fire Extinguisher
Car owners value their vehicles greatly. After all, they spent a good amount of money in it. Aside from that, cars also provide them with good transportation service. It is not a surprise that many safety-minded individuals install high quality fire extinguishers and fire safety devices in their cars for protection. However, even though many car owners are fully equipped with excellent car fire extinguishers, not many of them actually know how to operate one. Buying a good quality car fire extinguisher is one thing but knowing how to use it is another. Fortunately, operating this kind of firefighting tool is actually not that complicated. To make it simpler, just remember this code: PASS.
P stands for Pull the Safety Pin. Once you do this, the extinguisher is no longer locked and is ready for discharge.
A stands for Aim the Hose. Aim the nozzle, hose, or horn at the base of the fire since this is where the fuel is located. You need to extinguish the fuel to curb the fire effectively. Pointing the nozzle at the flames will do no good because this will only stop the fire temporarily.
S is for Squeeze the Lever. While aiming the nozzle, squeeze the handle gently to discharge the extinguishing agent into the base of the fire. If you were using a modern extinguisher, you would need to continue squeezing until the fire is completely out.
S is for Sweep Back And Forth. Make a sweeping motion from side to side whilst squeezing the levers until the fire has been completely extinguished.
Some important reminders-
Before attempting to extinguish a car fire, pull over so your vehicle is completely out of traffic. Using the fire extinguisher while the car is still moving is not safe and will not enable you to tackle the fire effectively. Fight the fire only if the fire is still small and not yet spreading. Otherwise, just pull over and run as far away as you can from your car. If you must stop in the middle of traffic, inform people about the ongoing fire and call up the fire brigade immediately.
cialis daily use review Never turn the extinguisher upside down and thump it when it has stopped working. This is not safe. If an extinguisher stops working, it means that it has run out of contents. Do not go back to the car even if you deem that you have already extinguished the fire. The best thing to do is to call up the fire brigade so they can do what they have to do. Think clearly and do not panic. Do not use a fire extinguisher unless you can be sure that you will be able to do it calmly and with a presence of mind.
The PASS procedure for using the car fire extinguisher is basically the same for other types of extinguishers like water fire extinguisher, C02 fire extinguishers, and so on. It is also very important to remember all the points that were mentioned above. This is to ensure that you will be able to extinguish the flames safely, successfully, and immediately should a vehicle fire ever occur.
For more tips and information about car fire extinguisher, please visit: http://www.fireprotectiononline.co.uk/water-fire-extinguisher/.
No related posts.
