Power Your Car Sound System With More Bass
Depth of the music is very important for all those who are all music enthusiasts. They also aim at giving a powerful music and equally good sound. So they are more interested in developing such a stereo. The high range of music is generally handled by the speakers at the rear decks, door panels and at the dash. A sub woofer is no substitute for a device which can handle lower ranges which also separate a audio system and stock system. As far as an audio professional is considered he can handle the job of installing sub woofer to your system. Even an individual can try doing it. But how to install a sub woofer in a factory stereo?
There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy. It includes trim panel removals, Philips head screw driver, speaker wires.
The first step is the disconnection of grounding cable and the battery of the vehicle. The grounding cable is connected to the vehicle’s frame through the lead that is negative. With the help of a Philips screw driver the clamps of the cables are all loosened and kept separate from the negative lead.
Second step is to find out the amplifier. If it is not an after marker amp and if it is factory installed one vehicle manual can help us locate the amplifier of the vehicle. Next step is to decide where the woofer should be placed. The choices available are car trunk or hatch back or cargo area of SUV on the rear side.
The speaker wires are routed to the place where the sub woofers are located. There are possibilities for it to be located some where away from the sub woofers, in such cases the wires can be sent through the carpets in the floor of the car. The trim panels which are present at the door openings are pried free with the help of a trim panel removal tool.
The trim panels at the opening of the door are all pried order acomplia from the floor free by using a trim panel removal tool. The carpet is then lifted up and the wiring is laid beneath it. Then using the hands the trim panels are replaced.
The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the speaker wires are made. At last a re connection is established between the vehicle battery’s negative lead post and the grounding cable. Then the cable clamps are fixed in its position and re installed using a Philips screw driver.
One must definitely know the simple steps on how to install a sub woofer in a factory stereo, to avoid unnecessary visits to the audio professional.
Learn more about Auto. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.
Related posts:
