Remove | Water Powered Cars

Posts Tagged ‘remove’

How To Remove A Old Volvo Stereo

Friday, February 26th, 2010

Do you all want to know how installation of stereo in a car has to be done especially in luxury and high end cars? Then this the perfect article that we should read. Let us learn How to Install a Radio in a Volvo. Many may think this job is complicated and assign a professional to do this. But it is very simple. We can save few bucks by trying to do this installation on our own.

For completing the installation process you will require nothing but a screw driver and a new radio that will act as the replacement for the old one.

The first step is purchasing a new stereo system for your car. The radio can be purchased in a car parts retail showroom or through eBay. But make sure that the radio you are buying matches with the car that you own. Keeping the model of the car and the year of manufacture in your mind will help you in this regard. Also consult with the shop assistant to check the compatibility. The new stereo will have a wiring harness adapter attached to it. There will also be a mount present.

How is the compatibility check made? It is simple. A harness for wiring and a mount provision for stereo should be present in any system that is compatible. The wires connected to negative terminal of car battery is disconnected. These wires are usually painted black in color. Center console has screws attached to it. These screws are removed by the use of screw driver and the console after being taken out is kept separately.

After removing the console, remove the old stereo system from the car. Then disconnect the antenna wire and the wiring harness from the stereo. These wires will be located at the rear end of the stereo. The next step is securing the stereo mount in the dash with the help of clips. The usage of clips can be avoided if the stereo mount fits snugly in the dash.

In the same way wire for antenna also needs to be connected to the rear side of the stereo system. After all these are done the stereo is put into dash.

After fixing the dash and console, the battery of the car can be connected back. This is done by putting back the black or negative end of the battery in its original position. The radio can then be turned on to check if the connections are made properly and are in working condition. Then, once everything is proper, place the screws back in its place.

Some precautions like prying out the clips from the car must be done carefully so that it does not cause major damage to the car. If this precaution is followed along with these instructions on how to install a radio in Volvo one can successfully complete this job.

Learn more about Autoradioblende. Stop by Author Name’s site where you can find out all about radio mounting kits and what it can do for you. You are welcome to reprint this article – but get your own unique content version here.

Tags: car radio, Cars, install, OEM, powernetshop.at, Radio, remove, vehicles, Volvo
Posted in Cars | No Comments »

How To Mount A Jeep Wrangler Head Unit

Monday, February 15th, 2010

People when opting for a particular car or a vehicle, will look for its mileage, name, making etc. now-a-days they look for the added facilities also. They want vehicles which are economic and which will provide latest features. These may include music systems also. Customers prefer listening to music when they are on a long drive. Thus the devices like music systems, radio, speakers are fixed in the cars. If they do not work, they can be repaired or changed. There are systems available in the markets for this. This article will tell you how to install a jeep wrangler radio.

For doing this task, a screwdriver, wrench and a panel tool are required. The following steps are to be done carefully with little precaution.

Then take your next thing that is the panel tool. With the help of it remove the trim panel. For that first find its location. It is located at the dash’s top. It has got heating vents and AC. This trim panel is pried up because the panel’s top position is almost exposed. The receiver is totally surrounded by its top.

Two screws are provided on the receiver’s top side. They will be seen after the vent is peered in the previous step. They are removed. The trim is peered off, from the receiver with the help of the panel kit. Once it is peered you will observe four screws, on the radio’s edges. These are also removed.

The screws that hold the panel of climate control in place is taken out. It is generally two in number. This panel of climate control is right below the opening of the radio. There is a retaining strap and this is found on the inside of the glove box of the jeep. Therefore, this glove box is opened and the strap is slid out carefully. Then, the glove compartment is lowered so that it is out of way.

Now the radio is taken out. There are wires connected to its back side. These wires are disconnected. Similarly the antenna is removed.

Now the new radio is taken. The wires and the antenna are connected to their respective sites. Then it is placed and bolt is tightened. Now the screws which we removed are fixed back to their place.

Thus the article helps you to know how to install a jeep wrangler radio. Thus you can enjoy your latest music with the newly installed one.

Want to find out more about Auto, then visit Author Name’s site on how to choose the best Car Audio for your needs.

Tags: Cars, cars_and_trucks, Jeep, Radio, remove, Wrangler
Posted in Cars | No Comments »

Quick Installation Procedure To Convert A Toyota Camry Head Unit

Wednesday, February 10th, 2010

A lot of luxury cars are available in the present day markets. These cars do have a lot of facilities. Toyota is a company well-known for its cars. They manufacture new model cars which meet the standards and the requirements of the people. One such car is the Toyota Camry. They have the audio systems in them. But people may want to install their own systems and receivers. This article will tell you how to remove the in dash receiver in a Toyota camry.

The first step you need to do is to remove the existing system. For carrying out that you should remove the CD or any other tapes you have running in your system. you should remove all the medias running presently in the system. then the next step you have to carry on is to turn off the power of your vehicle. This is an important step you have to carry on.

First the media used for playing is removed. The ignition of the car is turned off. Parking brake is set. The panels provided on the sides of the receiver are pried off. The screws behind them are taken out. The shift knob of the gear is unscrewed and hence removed.

The shift knob of the gear is unscrewed by turning it to the left. The knob is then removed. The door of compartment for storage that is present in lower part of the dash is opened. The panels that are present around shifter are pulled up and removed. This is started from behind the panel. The remaining part of the trim on console is pulled. After that the harness for wiring that is present underneath is released and trim panel is also removed.

Now you cannot remove the trim panel fully. In order to fully remove it you should do some work on the trim and carefully remove the entire one. All the wirings have to be removed for carrying out this step.

After the removal of storage compartment, the two bolts of the size 10 millimetres are removed. This is found below the controls controlling the heater. The two vents in upper dash which is above radio are pried out. Then the vents are removed.

Now you should remove bolts. For that locate the position those bolts. They are present beneath the controllers of your heater. Now you should carefully remove the vents. The vents are two in number. They are located above the radio’s upper dash. Carefully remove the bolts. Then you can see some adjustments for climatic changes at the back of your system. remove that also. Now finally remove all the wirings at your radio’s back.

With the help of this article and its above instructions, anyone can learn how to remove the in dash receiver in the Toyota Camry. This article is very specific to the Toyota Camry and cannot be followed for every other car.

Learn more about Autoradioblende. Stop by Author Name’s site where you can find out all about radio mounting kits and what it can do for you.

Tags: Camry, Cars, cars_and_trucks, Radio, receiver, remove, Toyota
Posted in Cars | No Comments »